How to fix(meliorate) paper jam error for Samsung printer ML-84/85/85G/1010H/1520P

ServicesManual.net

Paper jam is problem popular of printers. The ensue is paper jam error and description how to meliorate “Paper Jam” errors Samsung printer ML-84/85/85G/1010H/1520P

When paper jammed, The message error shown on smart panel of computer or flashing yellow light & printer does not print:

– Paper Jam 0 Open/Close Door
– Paper Jam 1 Check inside
– Paper Jam 2

I. The message error shown on Smart panel of pc: Paper Jam 0 Open/Close Door

samsung printer - firmware meliorate - chip reset fix fixDescription"Paper Jam 0 Open/Close Door": Printer does not print and paper not exited paper tray.
Error location: Jam at paper feeder input tray
Cause of error "Paper Jam 0 Open/Close Door":
– Wrinkled paper
– Paper too thick or too thin
– Pick-up roller of document feeder input tray has error: worn, torn, dirty.
– Feed sensor in paper tray occours error
– The paper is not tied into the printer.
Clear "Paper Jam 0 Open/Close Door"
1. Take out the paper tray .
2. take away paper jam.
3. Put in the paper tray & print check.

How to fix(restore)"Paper Jam 0 Open/Close Door" error of Samsung printer ML-84/85/85G/1010H/1520P:

– Clean Pick-up roller or change Pick-up roller by soft cloth. If still error, replace rubber surface of Pick-up roller.
– Change feed sensor in paper tray
– Put in paper good quality in to paper tray

II. The message error shown on Smart panel of pc: Paper Jam 1 Open/Close the door

samsung printer - firmware restore - chip reset fixDescription JAM 1: Paper does not exit.
Error location: Paper jammed in front of, inside the fuser, in the discharge roller or in the fuser just after passing through the Actuator-Feed.
Cause of error “Paper jam 1 Open/close the door” Samsung ML-84/85/85G/1010H/1520P
– Exit sensor may be error
– SMPS occur errors: power source is weak not enough yield the fuser unit heat up
– Main PBA has occur problem: Firmware error
– Reassembly components of toner printer cartridge are incorrect & them don’t rotate. Give paper does not pass toner cartridge
Clear jam
1. Open front cover
2. Take out toner printer cartridge
3. Move out paper jam.
How to fix(mend) “Paper jam 1 Open/close the door” error of Samsung printer ML-84/85/85G/1010H/1520P
– Clean exit sensor (it’s location at back side & on the right) by soft cloth. If still error, you must replace exit sensor
– Change SMPS board and main PBA
– take away components of toner cartridges & reassembly to correct. If some components is corrupt, you must renew new genuine toner cartridge

III. The message error shown on Smart panel of pc: Paper jam 2

samsung printer - firmware repair - chip reset fix fixDescription Paper Jam 2: Part of the paper has to exit
Error location: Paper jammed inside the fuser.
Cause of error “Paper Jam 2” of Samsung ML-84/85/85G/1010H/1520P
– Exit sensor may be error: It may stick open or return only slowly due to contamination be paper debris or foreign objects.
– Paper is wet, too thick, too thin or wrinkled.
– Spring of a Guide claw is broken away, damaged or deformed
– Fuser unit dirty (Heat-Roller or Pressure-Roller are dirty by toner powder or dust)
Clear Paper Jam 2
1. Open rear cover
2. Take out paper jam one way carefully and print test
How to fix(fix) “Paper Jam 2” error of Samsung printer ML-84/85/85G/1010H/1520P
– Clean exit sensor (it’s location at back side and on the right) by soft cloth with alcohol. If still error, you must regenerate exit sensor
– Choose good quality paper
– Replace spring of a Guide.
– Disassemble fuser unit and remove the jammed paper, & clean the surface of the pressure roller with dry soft cloth.
More details, you presentation in "Samsung printer ML-84/85/85G/1010H/1520P Service Repair Manual".
Samsung printer ML-84/85/85G/1010H/1520P Service Repair Manual document very important with technician when meliorate, disassemble (removable) components the Samsung printer ML-84/85/85G/1010H/1520P printer. "Samsung printer ML-84/85/85G/1010H/1520P Service Repair Manual" guide technician remove & installed components internal Samsung ML-84/85/85G/1010H/1520P printer, providing them knowledge intensive the component, how to take apart and mend bugs in the process of using Samsung printer ML-84/85/85G/1010H/1520P printer that the user themselves can not restore.
You can Price it at the coming:
samsung printer - firmware fix - chip reset fix fix pay for Samsung printer ML-84/85/85G/1010H/1520P Service Repair Manual: $ 5
To get Service Repair Manual, pls payment with ensue info :
Paypal : helinacare@gmail.com