How to fix(meliorate) printing quality problems for Samsung printer CLP-610/660 Printer

ServicesManual.net

Samsung CLP-610/660 has orrcur "Printed page problems": No image, Light or faded print, Toner specks, Dropouts, Vertical lines, Gray background, Toner smear, Vertical repetitive defects, Background scatter, Misformed characters, Page skew, Curl or wave, Wrinkles or creases, Back of printouts are dirty, Black pages(Completely Black Image), Loose toner, Character Voids, Horizontal stripes, Curl, White Spots / Black Spots / Colored Spots
Currently, Color laser printers CLP-610/660 is being used quite extensively. Samsung printer CLP-610/660 printers also has advantages ensuing: Enjoy quality printouts, Polymerised toner, Ergonomic design, Easy to put to work, Easy Colour Manager, Easy Solution support.However, we can not avoid the damage of your printer as some components of your printer caused in during use.
The ensue, I will introduce three basic errors with printing quality problems of Samsung CLP-610/660 printer and "How to mend it". With other print page errors, you shows at "Samsung CLP-610/660 Service Repair Manual"
1. Vertical black line & band on printed pages for Samsung printer CLP-610/660 Printer
samsung printer - firmware repair - chip reset fix fixDescription Vertical black line & band: On the printed pages have straight thin black vertical line & dark black vertical band.
Error location: LSU unit, axis developer, transfer roller, OPC drum, ITB unit.

Cause of error "Vertical black line and band" on the printed pages:

– LSU unit has occur problem or simply dirty
– Damaged develop roller in the developer. Deformed Doctor-blade or cleaning blade.
– Scratched surface of the discharge roller in the developer.
– Partly depression or deformation on the surface of the transfer roller
– Check if the surface of the charge roller is scratched or contaminated.
– Check if there are grooves on the circumference of the OPC drum.
– Test if the cleaning blade is damaged.
– Check if paper transfer belt is damaged or contaminated.

How to fix(restore) "Vertical black Line & Band" on the printed pages for Samsung printer CLP-610/660 Printer:

– Clean the LSU unit by soft cotton cloth & try to print. If printed page still faulty as initial you should renew new LSU unit or contact a service representative.
– If causes are cause 2nd and 3rd, you need regenerate new axis developer and try to print
– If causes are cause 4nd, you need change transfer roller.
– Change the imaging unit and check again.
– Regenerate the ITB unit & test again.
2. Dark Image or black on printed pages for Samsung printer CLP-610/660 Printer
Description Dark Image or black: The printed pages is dark or full black.
Error location: OPC drum, HVPS unit
Cause of error "Dark Image or black" on the printed page:
– No charge voltage in the HVPS board
– Charge voltage is not turned on due to the bad contact between power supply in the side of the developer and charge terminal of HVPS

How to fix(mend)"Dark Image or black" on the printed pages for Samsung printer CLP-610/660 Printer:

– Clean the high voltage charge terminal
– Check the state of the connector which connects the engine board and HVPS.
– Regenerate the HVPS if not solved by the atop direction 1 and 2
3. Light image on printed page for Samsung printer CLP-610/660 Printer
Description: The printed pages is light and no ghost
Error location: Developer, HVPS
Cause of error "Light image" on the printed pages
– Develop roller is stained when the toner of developer printer cartridge is almost consumed
– Temperature in room is below than 10*C
– Bad contact caused by the toner dirty between the high voltage terminal in the HVPS & the one in the set
– Abnormalities output from the HVPS
How to fix(meliorate) error "Light image" on the printed pages for Samsung printer CLP-610/660 Printer:
– Change the new developer and try to print out
– After printer is power on, please wait 30 minutes then start printing
– Clean up the dirty area by the toner
– Change the new HVPS if the problems are not solved by the atop four directions
4. Vertical White Line
samsung printer - firmware meliorate - chip reset fixDescription : White vertical voids in the image.

Cause of error "Vertical white line" on the printed page:

– Check if the LSU window or internal lenses of LSU is contaminated.
– Test if there are scratches on the circumference of the OPC drum.
– Check if there are scratches on the circumference of the developing roller.
– Check if paper transfer belt is damaged or contaminated.
How to fix(restore) error "Vertical white line" on the printed page for Samsung printer CLP-610/660 Printer:
– Clean the LSU window with recommended cleaner(IP A). Clean the window with a clean cotton swab. If dirt is inside the LSU, change the LSU.
– Regenerate the imaging unit and check again- Change the ITB unit & check again.
Samsung printer CLP-610/660 Service Repair Manual document very important with technician when meliorate, disassemble (removable) components the Samsung CLP-610/660 printer. "Samsung CLP-610/660 Service Repair Manual" guide technician remove & setup components internal Samsung CLP-610/660 printer, providing them knowledge intensive the component, how to take apart and mend bugs in the process of using Samsung printer CLP-610/660 printer that the user themselves can not fix.
More details, you appear in "Samsung CLP-610/660 Service Repair Manual". You can fee it at the ensue:
samsung printer - firmware mend - chip reset fixpay for Samsung printer CLP-610/660 Service Repair Manual: $ 5
To get Service Repair Manual, pls payment with ensuing info :
Paypal : helinacare@gmail.com