• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
servicesmanual.net

Service Manuals - Repair printer - Fix printer by Firmware reset fix

Your printer has some problem? we will help you repair your printer

  • Home
  • Canon Service Manual
  • Samsung Repair Guide
  • About us
You are here: Home / Fax & Printer Technical / Samsung Repair Guide / How to restore Printer does not print Samsung printer ML-84/85/85G/1010H/1520P

How to restore Printer does not print Samsung printer ML-84/85/85G/1010H/1520P

March 29, 2014 by

When you print a document, nothing printed. Cause of error "The printer does not print" are the cable connect has occur problems, the printer not selected as the default printer, cover is not closed, your printer is malfunctioning …
Currently, Samsung printer ML-84/85/85G/1010H/1520P very rarely using. The printer model is out of date. It is mono laser printer. However, I also would like to introduce to you how to handle a number of errors when "The printer does not print"
samsung printer - firmware restore - chip reset fix

When the printer experiences an error, the Smart Panel program window & LED status will manifestation to show the printer’s status or errors. Find the light pattern below that matches the printer light pattern and follow the solutions to clear the error.

The cause of "The printer does not print" by Samsung printer ML-84/85/85G/1010H/1520P printer:

1. The printer is power off or not receiving (LED status is off).
2. The printer is not selected as the default printer
3. Check the printer for the ensuing:
+ The printer cover is not closed (LED status is red).
+ Paper is jammed (LED warning turned on and off repeatedly).
+ No paper is loaded.
+ The toner printer cartridge is not setup (LED status is red).
4. The printer may be in manual feed mode & out of paper
5. The connection cable between the laptop & the printer is disconnected properly.
6. The connection cable between the pc & your printer is defective.
7. The port setting is incorrect.
8. The printer may be configured incorrectly.
9. The printer driver may be incorrectly setup.
10. The indicated Toner printer cartridge is almost empty or low. Now, on the smart panel shown on: Toner low, Toner printer cartridge is empty – change new cart & Toner LED red turned on and off repeatedly.
11. Fuser error, Scan error
13. Main PBA error (May be upgrade firmware mend is wrong)

How to fix(meliorate) "The printer does not print" by Samsung printer ML-84/85/85G/1010H/1520P printer(See more details in Samsung printer ML-84/85/85G/1010H/1520P Service Repair Manual):

1. Check the power cord connections. Check the power switch & the power source. If cause not the power cable, replace the power supply.
2. Select Samsung ML-84/85/85G/1010H/1520P PCL 6 as your default printer in your Windows (Start-printer & fax(Devices and printer)-find to Samsung printer ML-84/85/85G/1010H/1520P series-right click-choose "Set as default printer")
3. Repair printer cover, paper jam, no paper:
samsung printer - firmware mend - chip reset fix fix+ Close your printer cover.
+ Clear the paper jam.
+ Load paper.
+ Install the toner cartridges.
4. Check the message on the Smart Panel program window, add paper to the tray & press the Stop button on the setup panel.
5. Disconnect your printer cable & reconnect it.
6. If possible, attach the cable to another computer that is working properly & print a job. You can also try using a different printer cable.
7. Test the Windows printer setting to render sure that the print job is sent to the correct port. If the pc has more than one port, yield sure that your printer is attached to the correct one.
8. Test the printer properties to ensure that all of the print settings are correct.
9. Repair your printer software. See the Software Section. Try printing a test page.
10. Regenerate the Toner Cartridge end life. To temporarily improve printing for a short time remove the toner printer cartridge low and shake it gently from side to side. If you do not want renew toner cartridge. You must toner refill and replace toner chip or toner refil and upgrade firmware mend (reset fix meliorate) Samsung printer ML-84/85/85G/1010H/1520P
11. Change fuser unit and LSU
12. Replace main PBA
More details, you view in "Samsung ML-84/85/85G/1010H/1520P Service Repair Manual"
Samsung ML-84/85/85G/1010H/1520P Service Repair Manual document very important with technician when meliorate, disassemble (removable) components the Samsung ML-84/85/85G/1010H/1520P printer. "Samsung ML-84/85/85G/1010H/1520P Service Repair Manual" guide technician remove & installed components internal Samsung printer ML-84/85/85G/1010H/1520P printer, providing them knowledge intensive the component, how to take apart and mend bugs in the process of used Samsung printer ML-84/85/85G/1010H/1520P printer that the user themselves can not mend.
You can Cost it at the following:
samsung printer - firmware restore - chip reset fix fix

fee for Samsung printer ML-84/85/85G/1010H/1520P Service Repair Manual: $ 5
To get Service Repair Manual, pls payment with following info :
Paypal : helinacare@gmail.com

Filed Under: Samsung Repair Guide Tagged With: fix printer samsung, repair printer samsung, samsung errors, samsung printer

Primary Sidebar

Recent Posts

  • Download Canon iR3530, iR3570, iR4530, iR4570 service repair manual
  • Download Canon iR1200, iR1300 service repair manual
  • Download Canon iR1200, iR1300 service repair manual
  • Download Canon iR3035A, iR3045, iR3045N, iR3045A service repair manual
  • Download Canon iR1200, iR1300, iR1500, iR1600 Series Parts Catalog

Recent Comments

No comments to show.

Archives

  • September 2016
  • June 2016
  • July 2015
  • June 2015
  • March 2015
  • April 2014
  • March 2014

Categories

  • Canon Service Manual
  • Samsung Repair Guide

Copyright © 2025 · All Rights Reserved