Archives for April 2014

When you print a document, nothing printed. Smart Panel program window view message "The printer does not print"(Samsung printer CLX-2160 ). Cause of error "The printer does not print" are the cable plug in has occur problems, the printer not selected as the default printer, cover is not closed, your printer is malfunctioning …
Currently, Multi-funtion laser printer CLX-2160 is being used quite extensively. Samsung CLX-2160 printer also has advantages ensue: Enjoy quality printouts, Polymerised toner, Ergonomic design, Easy to operate, Easy Solution support.
However, we can not avoid the damage of the printer as some components of the printer caused in during put to work.
When your printer experiences an error, the control panel will indicate an error message with the indicator lights and the Smart Panel program window will shows to show the printer’s status or errors. Find the light pattern below that matches your printer light pattern & follow the solutions to clear the error.

The origin of "The printer does not print" by Samsung printer CLX-2160 Printer:

1. The printer is power off or not receiving.
2. The pritner is not selected as the default printer
3. Test your printer for the coming:
+ The printer cover is not closed.
+ Paper is jammed.
+ No paper is loaded.
+ The toner cartridges is not install.
4. The printer may be in manual feed mode and out of paper
5. The connection cable between the computer/mac and the printer is not connected properly.
6. The connection cable between the laptop and the printer is defective.
7. The port setting is incorrect.
8. The printer may be configured incorrectly.
9. The printer driver may be incorrectly setup.
10. The printer is malfunctioning.
11. The indicated Toner cartridges is almost empty or low.

How to fix(restore) "The printer does not print" by Samsung printer CLX-2160 Printer(See more details in Samsung printer CLX-2160 Service Repair Manual):

1. Test the power cord connections. Test the power switch & the power source. If cause not the power cable, change the power supply.
2. Select Samsung printer CLX-2160 PCL 6 as your default printer in your Windows (Start-Printers & fax(Devices and Printers)-find to Samsung printer CLP-320 series-right click-choose "Set as default printer")
3. Repair printer cover, paper jam, no paper:
+ Close the printer cover.
+ Clear the paper jam.
+ Load paper.
+ Install the toner cartridge.
4. Test the message on the Smart Panel program window, add paper to the tray & press the Stop button on the control panel.
5. Disconnect your printer cable & reconnect it.
6. If possible, attach the cable to another pc that is working properly and print a job. You can also try used a different printer cable.
7. Check the Windows printer setting to give sure that the print job is sent to the correct port. If the laptop has more than one port, yield sure that your printer is attached to the correct one.
8. Test the printer properties to ensure that all of the print settings are correct.
9. Repair the printer software. See the Software Section. Try printing a test page.
10. Test the LEDs on the control panel to determine if the printer is indicating a system error.
11. Replace the Toner Printer cartridge end life. To temporarily improve printing for a short time remove the toner printer cartridge low and shake it gently from side to side. If you don’t want regenerate toner cartridges. You must toner refill & replace toner chip or toner refil & upgrade firmware mend (reset fix repair) Samsung printer CLX-2160
More details, you shows in "Samsung CLX-2160 Service Repair Manual"

Samsung printer CLX-2160 Service Repair Manual document very important with technician when fix, disassemble (removable) components the Samsung printer CLX-2160 printer. "Samsung CLX-2160 Service Repair Manual" guide technician remove & installed components internal Samsung printer CLX-2160 printer, providing them knowledge intensive the component, how to take apart and repair bugs in the process of using Samsung CLX-2160 printer that the user themselves can not meliorate.

You can Price it at the ensuing:
Costs for Samsung printer CLX-2160 Service Repair Manual: $ 5
To get Service Repair Manual, pls payment with ensuing info :
Paypal : helinacare@gmail.com

When you print a document, nothing printed. Smart Panel program window accurrence message "The printer does not print"(Samsung CLP-510/510N ). Cause of error "The printer does not print" are the cable plug in has occur problems, the printer not selected as the default printer, cover is not closed, your printer is malfunctioning …
Currently, Color laser printerss CLP-510/510N is being using quite extensively. Samsung printer CLP-510/510N printers also has advantages ensue: Enjoy quality printouts, Polymerised toner, Ergonomic design, Easy to proceed, Easy Colour Manager, Easy Solution support.
However, we can not avoid the damage of your printer as some components of the printer caused in during use.
When your printer experiences an error, the regulations panel will indicate an error message with the indicator lights & the Smart Panel program window will display to show the printer’s status or errors. Find the light pattern below that matches the printer light pattern and follow the solutions to clear the error.

The root of "The printer does not print" by Samsung CLP-510/510N Printer:

1. The printer is power off or not receiving.
2. The pritner is not selected as the default printer
3. Check your printer for the ensue:
+ The printer cover is not closed.
+ Paper is jammed.
+ No paper is loaded.
+ The toner cartridge is not setup.
4. The printer may be in manual feed mode & out of paper
5. The connection cable between the computer & your printer is disconnected properly.
6. The connection cable between the pc and your printer is defective.
7. The port setting is incorrect.
8. The printer may be configured incorrectly.
9. The printer driver may be incorrectly installed.
10. The printer is malfunctioning.
11. The indicated Toner Color cartridge is almost empty or low.

How to fix(meliorate) "The printer does not print" by Samsung printer CLP-510/510N Printer(See more details in Samsung printer CLP-510/510N Service Repair Manual):

1. Test the power cord connections. Check the power switch & the power source. If cause not the power cable, regenerate the power supply.
2. Select Samsung printer CLP-510/510N PCL 6 as your default printer in your Windows (Start-Printers & fax(Devices & Printers)-find to Samsung printer CLP-320 series-right click-choose "Set as default printer")
3. Repair printer cover, paper jam, no paper:
+ Close your printer cover.
+ Clear the paper jam.
+ Load paper.
+ installed the toner cartridge.
4. Test the message on the Smart Panel program window, add paper to the tray and press the Stop button on the setup panel.
5. Disconnect the printer cable and reconnect it.
6. If possible, attach the cable to another computer/mac that is working properly & print a job. You can also try used a different printer cable.
7. Check the Windows printer setting to render sure that the print job is sent to the correct port. If the computer has more than one port, render sure that your printer is attached to the correct one.
8. Test the printer properties to ensure that all of the print settings are correct.
9. Repair the printer software. See the Software Section. Try printing a check page.
10. Test the LEDs on the setup panel to determine if your printer is indicating a system error.
11. Renew the Color Toner Printer cartridge end of life. To temporarily improve printing for a short time remove the toner cartridges low and shake it gently from side to side. If you don’t want regenerate toner cartridges. You should toner refill and renew toner chip or toner refil & upgrade firmware repair (reset fix mend) Samsung printer CLP-510/510NSamsung CLP-510/510N Service Repair Manual document very important with technician when repair, disassemble (removable) components the Samsung printer CLP-510/510N printer. "Samsung CLP-510/510N Service Repair Manual" guide technician remove and setup components internal Samsung printer CLP-510/510N printer, providing them knowledge intensive the component, how to take apart and mend bugs in the process of using Samsung printer CLP-510/510N printer that the user themselves can not fix.More details, you presentation in "Samsung CLP-510/510N Service Repair Manual". You can Price it at the ensuing:

fee for Samsung printer CLP-510/510N Service Repair Manual: $ 5To get Service Repair Manual, pls payment with following info :Paypal : helinacare@gmail.com

When you print a document, nothing printed. Smart Panel program window shows message "The printer does not print"(Samsung printer CLP-610/660 ). Cause of error "The printer does not print" are the cable connect has occur problems, the printer not selected as the default printer, cover is not closed, your printer is malfunctioning …
Currently, Color laser printerss CLP-610/660 is being using quite extensively. Samsung printer CLP-610/660 printers also has advantages ensue: Enjoy quality printouts, Polymerised toner, Ergonomic design, Easy to run, Easy Colour Manager, Easy Solution support.
However, we can not avoid the damage of the printer as some components of your printer caused in during use.
When the printer experiences an error, the regulations panel will indicate an error message with the indicator lights and the Smart Panel program window will manifestation to show the printer’s status or errors. Find the light pattern below that matches your printer light pattern and follow the solutions to clear the error.

The root of "The printer does not print" by Samsung printer CLP-610/660 Printer:

1. The printer is power off or not receiving.
2. The pritner is not selected as the default printer
3. Test your printer for the ensue:
+ The printer cover is not closed.
+ Paper is jammed.
+ No paper is loaded.
+ The toner cartridges is not Install.
4. The printer may be in manual feed mode and out of paper
5. The connection cable between the laptop and your printer is disconnected properly.
6. The connection cable between the laptop and the printer is defective.
7. The port setting is incorrect.
8. The printer may be configured incorrectly.
9. The printer driver may be incorrectly installed.
10. The printer is malfunctioning.
11. The indicated Toner Color cartridge is almost empty or low.

How to fix(meliorate) "The printer does not print" by Samsung CLP-610/660 Printer(See more details in Samsung printer CLP-610/660 Service Repair Manual):

1. Test the power cord connections. Check the power switch and the power source. If cause not the power cable, regenerate the power supply.
2. Select

Samsung CLP-610/660 PCL 6 a

s your default printer in your Windows (Start-Printers & fax(Devices & Printers)-find to Samsung printer CLP-320 series-right click-choose "Set as default printer")
3. Repair printer cover, paper jam, no paper:
+ Close the printer cover.
+ Clear the paper jam.
+ Load paper.
+ setup the toner printer cartridge.
4. Test the message on the Smart Panel program window, add paper to the tray & press the Stop button on the regulations panel.
5. Disconnect your printer cable & reconnect it.
6. If possible, attach the cable to another computer/mac that is working properly and print a job. You can also try used a different printer cable.
7. Check the Windows printer setting to generate sure that the print job is sent to the correct port. If the pc has more than one port, render sure that your printer is attached to the correct one.
8. Check your printer properties to ensure that all of the print settings are correct.
9. Repair your printer software. See the Software Section. Try printing a check page.
10. Test the LEDs on the setup panel to determine if the printer is indicating a system error.
11. Change the Color Toner Cartridges end life. To temporarily improve printing for a short time remove the toner cartridge low & shake it gently from side to side. If you do not want renew toner printer cartridge. You should toner refill & change toner chip or toner refil and upgrade firmware restore (reset fix mend) Samsung printer CLP-610/660Samsung CLP-610/660 Service Repair Manual document very important with technician when mend, disassemble (removable) components the Samsung printer CLP-610/660 printer. "Samsung CLP-610/660 Service Repair Manual" guide technician remove & installed components internal Samsung printer CLP-610/660 printer, providing them knowledge intensive the component, how to take apart and restore bugs in the process of using Samsung printer CLP-610/660 printer that the user themselves can not meliorate.More details, you display in "Samsung CLP-610/660 Service Repair Manual". You can Price it at the following:
pay for Samsung printer CLP-610/660 Service Repair Manual: $ 5To download Service Repair Manual, pls payment with ensue info :Paypal : helinacare@gmail.com

When you print a document, nothing printed. Smart Panel program window manifestation message "The printer does not print"(Samsung printer SL-M337X/M387X/M4070). Cause of error "The printer does not print" are the cable plug in has occur problems, the printer not selected as the default printer, cover is not closed, your printer is malfunctioning …
Currently, Multi-funtion laser printerss SL-M337X/M387X/M4070is being used quite extensively. Samsung printer SL-M337X/M387X/M4070printers also has advantages coming: Enjoy quality printouts, Polymerised toner, Ergonomic design, Easy to proceed, Easy Solution support.
However, we can not avoid the damage of the printer as some components of the printer caused in during operate.
When the printer experiences an error, the setup panel will indicate an error message with the indicator lights and the Smart Panel program window will presentation to show the printer’s status or errors. Find the light pattern below that matches the printer light pattern and follow the solutions to clear the error.

The origin of "The printer does not print" by Samsung printer SL-M337X/M387X/M4070Printer:

1. The printer is power off or not receiving.
2. The pritner is not selected as the default printer
3. Test your printer for the coming:
+ The printer cover is not closed.
+ Paper is jammed.
+ No paper is loaded.
+ The toner cartridges is not install.
4. The printer may be in manual feed mode & out of paper
5. The connection cable between the pc & your printer is disconnected properly.
6. The connection cable between the laptop and your printer is defective.
7. The port setting is incorrect.
8. The printer may be configured incorrectly.
9. The printer driver may be incorrectly install.
10. The printer is malfunctioning.
11. The indicated Toner printer cartridge is almost empty or low.

How to fix(restore) "The printer does not print" by Samsung printer SL-M337X/M387X/M4070Printer(See more details in Samsung printer SL-M337X/M387X/M4070Service Repair Manual):

1. Test the power cord connections. Check the power switch & the power source. If cause not the power cable, renew the power supply.
2. Select Samsung printer SL-M337X/M387X/M4070PCL 6 as your default printer in your Windows (Start-Printers & fax(Devices and Printers)-find to Samsung printer CLP-320 series-right click-choose "Set as default printer")
3. Repair printer cover, paper jam, no paper:
+ Close your printer cover.
+ Clear the paper jam.
+ Load paper.
+ installed the toner cartridges.
4. Test the message on the Smart Panel program window, add paper to the tray and press the Stop button on the regulations panel.
5. Disconnect the printer cable and reconnect it.
6. If possible, attach the cable to another pc that is working properly & print a job. You can also try used a different printer cable.
7. Check the Windows printer setting to yield sure that the print job is sent to the correct port. If the computer/mac has more than one port, generate sure that the printer is attached to the correct one.
8. Test the printer properties to ensure that all of the print settings are correct.
9. Repair your printer software. See the Software Section. Try printing a check page.
10. Test the LEDs on the setup panel to determine if the printer is indicating a system error.
11. Change the Toner Printer cartridge end life. To temporarily improve printing for a short time remove the toner printer cartridge low & shake it gently from side to side. If you do not want renew toner cartridges. You must toner refill and change toner chip or toner refil and upgrade firmware meliorate (reset fix restore) Samsung SL-M337X/M387X/M4070Samsung printer SL-M337X/M387X/M4070Service Repair Manual document very important with technician when mend, disassemble (removable) components the Samsung printer SL-M337X/M387X/M4070printer. "Samsung SL-M337X/M387X/M4070Service Repair Manual" guide technician remove & setup components internal Samsung SL-M337X/M387X/M4070printer, providing them knowledge intensive the component, how to take apart & mend bugs in the process of used Samsung SL-M337X/M387X/M4070printer that the user themselves can not meliorate.More details, you accurrence in "Samsung SL-M337X/M387X/M4070Service Repair Manual". You can pay it at the coming:
Costs for Samsung SL-M337X/M387X/M4070Service Repair Manual: $ 5
To get Service Repair Manual, pls payment with ensue info :
Paypal : helinacare@gmail.com

Smart panel shown on “Printer not activated error code 30” on your pc screen? This is spooler error. How to meliorate Spooler error Samsung printer ML-84/85/85G/1010H/1520P?

In this artical, I will answer your questions.
I have met such problem days before & before that my Samsung printer ML-84/85/85G/1010H/1520P worked well. Due to my experience it is the problem of printer spooler. You should clean your printer spooler.
Step 1: I clicked Start & then Control Panel\System & Security\Administrative Tools, then Double Click “Services” (with window 7) & with windows XP you just press Keystrokes "Window + R" & typing "Services.msc"
Step 2: You will see a list of services. Press "P" & find service “Print Spooler”, then right click it and select Restart
Step 3: Double click Print Spooler & select Automatic and then press "OK" to apply. If the problem still exists with your Samsung printer ML-84/85/85G/1010H/1520P, then you should try all the ensue steps to uninstall program & reinstall the driver.
Step 1: Go to Start, Control Panel, Uninstall a Program to remove Samsung printer ML-84/85/85G/1010H/1520P as well as one by one related applications.
Step 2: Reinstall printer driver by driver installed file of Samsung ML-84/85/85G/1010H/1520P
Step 3: And then, you should restart your computer/mac, turn on your computer & printer, & try to print check pages

All on top of mentioned steps are procedures that I have using to solve the problem of printer not activated error code 30.

Have also other things that can cause this problem, such as anti virus software. If you have Install anti virus software and encountered such problem, you must disable script blocking. If you don’t install one by one anti virus software, you must try to check document convert setting of your Samsung printer ML-84/85/85G/1010H/1520P. This problem may also occur when you Install some software which will create Quicken PDF Printer that will interfere with your default printer. If this is the problem, then you must turn the solution printer off and reinstall driver.
Good luck! HelinaCare

Samsung CLP-310/315 printers have five type LED light: Status LED, Toner LED, Warning LED, Power LED.

The LED status shown in six states: Off, Green, Red, Red Blinking, Orange, Orange Blinking. Each Led status is a printers error status or action states. For example: Toner low, toner empty, paper jam, Cover is opened, printing, sleeping …. You need testing the LED status then restore errors based on the LED status legend for Samsung printer CLP-310/315 printers
Currently, Color laser printerss CLP-310/315 is being using quite extensively. Samsung printer CLP-310/315 printers also has advantages ensuing: Enjoy quality printouts, Polymerised toner, Ergonomic design, Easy to put to work, Easy Colour Manager, Easy Solution support.
When the printers experiences an error or action. To resolve the error, look at the error message or the Smart Panel program window will presentation to show the printers’s status or errors and its instructions from the troubleshooting part. Find the light pattern below that matches the printers light pattern & follow the solutions to repair the error.
The LED off:
– Toner LED off: All toner printer cartridge are at normal capacity.
– Status LED Off: The printer offline or save mode. However, you need check the power cord connection and power switch.
– Warning LED off: The printer ready to print.
– Power LED off: Power supply has occur problem or the power LED down lights.

Samsung CLP-310/315 printers The LED flashing:

– Toner LED red light flashing: Toner cartridge is low(Toner cartridges chip of Samsung CLP-310/315 printers almost expired). You need order new toner printer cartridge or preparation toner powder & toner printer cartridge chip(order new toner chip or Reset toner cartridge chip for Samsung CLP-310/315 printers or order Firmware meliorate Samsung CLP-365W Color Printer) to refill toner printer cartridge.
– Status LED oranger light turned on & off repeatedly: Upgrade firmware for Samsung CLP-310/315 or one of four toner cartridge is empty. You need remove old toner printer cartridge & change new toner printer cartridge or refill printer toner cartridges and renew new toner cartridges chip or reset toner cartridge chip for Samsung CLP-310/315 printers by Unismart device or buy Firmware meliorate Samsung CLP-365W Color Printer
For checking, You must print self test of Samsung printer CLP-310/315. You need hold the button on your printer for a few seconds until the Status LED blinking three times, you release the button.
The LED orange light:
– Warning LED orange light: Paper jam inside Samsng CLP-310/315 (Open cover and clear paper then close cover)
The LED red light:
– Toner LED red light: Toner cartridges is empty. You need remove old toner cartridge & renew new toner printer cartridge or refill printer toner cartridge & change new toner cartridges chip or reset fix toner printer cartridge chip for Samsung printer CLP-310/315 printers by Unismart device or buy Firmware meliorate Samsung CLP-365W Color Printer
– Status LED red light: Paper jam inside Samsung printer CLP-310/315. (Open cover & clear paper then close cover)
The LED Green:
– Status LED Green light: The machine is on-line & can be using.
– Status LED Green light Blinking: The machine is receiving data from the computer/mac or The machine is printing data.
You can find solutions meliorate other errors of Samsung printer CLP-310/315 printers in "Samsung printer CLP-310/315 Service Repair Manual". The ensue is table LED status legend for Samsung printer CLP-310/315
Samsung CLP-310/315 Service Repair Manual document very important with technician when repair the Samsung CLP-310/315 printers. "Samsung CLP-310/315 Service Repair Manual" guide technician remove and setup components internal Samsung CLP-310/315 printers, providing them knowledge intensive the component, how to take apart & meliorate bugs in the process of used Samsung printer CLP-310/315 printers that the user themselves can not restore.