repair printer samsung

The ensue is full way description of disassembly/reassembly. In this manual is listed according to the disassembly procedures. If you find the certain unit or assembly, please consult it’s name by the picture in the "Samsung CLP-610/660 Service Repair Manual"
Main components of Samsung printer CLP-610/660 printer include: Cover, ITB (Image Transfer-Bell), Fuser unit, HVPS (High Voltage Power Supply) board, main PBA (card formater), SMPS board (Switched-mode power supply), LSU (Laser Scanning Unit), Holder Pad, transfer roller, OPE PBA, pick up roller.

The coming is disassemble (removable) components Samsung printer CLP-610/660 printer manual.

I. How to remove cover

This section is description how to open all of the covers (top cover, front cover, DEVE cover, exit cover, and duplex cover).
1. Move out the paper tray.
2. Open the top cover and remove 6 screws. Then to remove top cover you need remove 2 screws & one connector.
3. take away the 2 screws from the rear cover to remove side cover
4. Move out the 1 screw to remove the left cover.
5. Unlatch the 2 hooks from the bottom of frame. Then unlatch the hook and remove the left cover. And in the same way, to remove right cover is very easy.
6. Open the front cover, remove left and right link, then remove Damper hinge-R after remove the 2 screws. Now, you can remove front cover so easy.
7. Take out 4 screw to remove rear cover
II. How to remove ITB (Image Transfer-Bell)
1. Take out the front cover. (Review I)
2. take away the ITB unit after remove the ITB lock levers on both sides of the unit.

III. How to remove Fuser unit

1. Open the left cover,right cover, top cover (Review I)
2. take away the 7 screws to remove the Bracket main & Duct.
3. Move out the 4 screws and remove the LSU Unit..
Caution: The fuser is so hot. So, You must turn your printer off and please wait until the printer to cool before remove it.

IV. How to remove HVPS (High Voltage Power Supply) board

1. Remove the front cover. Top cover, rear cover (Refer to I).
2. Unplug the 7 connectors from the main PBA
3. Unplug one flat cable
4. Take out 8 screws & 4 hook then remove the HVPS.
V. How to remove main PBA (card formater)
1. Take out the rear cover. (Refer to I)
2. take away 4 screws from the main PBA bracket
3. Unplug the all jack connectors. And remove the main PBA (card formater).

VI. How to remove SMPS board (Switched-mode power supply)

1. Move out the rear cover. (Refer to I)
2. take away 4 screws from the SMPS. Then remove 1 screw from the harness guide
3. Take out all connectors from the SMPS and then remove the SMPS (Switched-mode power supply) board.

VII. How to remove LSU (Laser Scanning Unit)

1. take away the 7 screws to remove the Bracket main & Duct
2. Move out the 4 screws & remove the LSU Unit.
VIII. How to remove fuser fan
1. Remove rear cover, top cover (Refer I) & remove main PBA (refer V)
2. Release 3 screws remove one connector from the main PBA & then take out the fuser fan.

IX. How to remove fuser regulations board

1. Unplug the Harness.
2. take away the 4 screws, & release the Fuser control board from the frame.

X. How to remove pickup roller

1. Open rear cover (refer 1)
2. Remove Pickup roller shown below
Samsung printer CLP-610/660 Service Repair Manual document very important with technician when meliorate, disassemble (removable) components the Samsung printer CLP-610/660 printer. "Samsung CLP-610/660 Service Repair Manual" guide technician remove and install components internal Samsung printer CLP-610/660 printer, providing them knowledge intensive the component, how to take apart & fix bugs in the process of used Samsung printer CLP-610/660 printer that the user themselves can not mend.
More details to disassemble (removable) components Samsung printer CLP-610/660 printer, you manifestation in "Samsung CLP-610/660 Service Repair Manual". You can pay it at the following:

Cost for Samsung printer CLP-510/510N Service Repair Manual: $ 5
To get Service Repair Manual, pls payment with coming info :
Paypal : helinacare@gmail.com

When you print a document, nothing printed. Cause of error "The printer does not print" are the cable connect has occur problems, the printer not selected as the default printer, cover is not closed, your printer is malfunctioning …
Currently, Samsung printer ML-84/85/85G/1010H/1520P very rarely using. The printer model is out of date. It is mono laser printer. However, I also would like to introduce to you how to handle a number of errors when "The printer does not print"

When the printer experiences an error, the Smart Panel program window & LED status will manifestation to show the printer’s status or errors. Find the light pattern below that matches the printer light pattern and follow the solutions to clear the error.

The cause of "The printer does not print" by Samsung printer ML-84/85/85G/1010H/1520P printer:

1. The printer is power off or not receiving (LED status is off).
2. The printer is not selected as the default printer
3. Check the printer for the ensuing:
+ The printer cover is not closed (LED status is red).
+ Paper is jammed (LED warning turned on and off repeatedly).
+ No paper is loaded.
+ The toner printer cartridge is not setup (LED status is red).
4. The printer may be in manual feed mode & out of paper
5. The connection cable between the laptop & the printer is disconnected properly.
6. The connection cable between the pc & your printer is defective.
7. The port setting is incorrect.
8. The printer may be configured incorrectly.
9. The printer driver may be incorrectly setup.
10. The indicated Toner printer cartridge is almost empty or low. Now, on the smart panel shown on: Toner low, Toner printer cartridge is empty – change new cart & Toner LED red turned on and off repeatedly.
11. Fuser error, Scan error
13. Main PBA error (May be upgrade firmware mend is wrong)

How to fix(meliorate) "The printer does not print" by Samsung printer ML-84/85/85G/1010H/1520P printer(See more details in Samsung printer ML-84/85/85G/1010H/1520P Service Repair Manual):

1. Check the power cord connections. Check the power switch & the power source. If cause not the power cable, replace the power supply.
2. Select Samsung ML-84/85/85G/1010H/1520P PCL 6 as your default printer in your Windows (Start-printer & fax(Devices and printer)-find to Samsung printer ML-84/85/85G/1010H/1520P series-right click-choose "Set as default printer")
3. Repair printer cover, paper jam, no paper:
+ Close your printer cover.
+ Clear the paper jam.
+ Load paper.
+ Install the toner cartridges.
4. Check the message on the Smart Panel program window, add paper to the tray & press the Stop button on the setup panel.
5. Disconnect your printer cable & reconnect it.
6. If possible, attach the cable to another computer that is working properly & print a job. You can also try using a different printer cable.
7. Test the Windows printer setting to render sure that the print job is sent to the correct port. If the pc has more than one port, yield sure that your printer is attached to the correct one.
8. Test the printer properties to ensure that all of the print settings are correct.
9. Repair your printer software. See the Software Section. Try printing a test page.
10. Regenerate the Toner Cartridge end life. To temporarily improve printing for a short time remove the toner printer cartridge low and shake it gently from side to side. If you do not want renew toner cartridge. You must toner refill and replace toner chip or toner refil and upgrade firmware mend (reset fix meliorate) Samsung printer ML-84/85/85G/1010H/1520P
11. Change fuser unit and LSU
12. Replace main PBA
More details, you view in "Samsung ML-84/85/85G/1010H/1520P Service Repair Manual"
Samsung ML-84/85/85G/1010H/1520P Service Repair Manual document very important with technician when meliorate, disassemble (removable) components the Samsung ML-84/85/85G/1010H/1520P printer. "Samsung ML-84/85/85G/1010H/1520P Service Repair Manual" guide technician remove & installed components internal Samsung printer ML-84/85/85G/1010H/1520P printer, providing them knowledge intensive the component, how to take apart and mend bugs in the process of used Samsung printer ML-84/85/85G/1010H/1520P printer that the user themselves can not mend.
You can Cost it at the following:

fee for Samsung printer ML-84/85/85G/1010H/1520P Service Repair Manual: $ 5
To get Service Repair Manual, pls payment with following info :
Paypal : helinacare@gmail.com

Samsung CLP-310/315 has orrcur "Printed pages problems": Light or faded print, Toner specks, Dropouts, Vertical lines, Gray background, Toner smear, Vertical repetitive defects, Background scatter, Misformed characters, Page skew, Curl or wave, Wrinkles or creases, Back of printouts are dirty, Black pages, Loose toner, Character Voids, Horizontal stripes, Curl.
Currently, Color laser printers CLP-310/315 is being used quite extensively. Samsung printer CLP-310/315 printers also has advantages ensuing: Enjoy quality printouts, Polymerised toner, Ergonomic design, Easy to put to work, Easy Colour Manager, Easy Solution support.
However, we can not avoid the damage of the printer as some components of the printer caused in during run.
The ensuing, I will introduce three standard errors with printing quality problems of Samsung printer CLP-310/315 printer & "How to fix it". With other print pages errors, you appear at "Samsung CLP-310/315 Service Repair Manual"

1. Vertical Line & Band on printed page for Samsung printer CLP-310/315 Printer

Description Vertical line and band: On the printed pages have straight thin black vertical line and dark black vertical band.
Error location: LSU unit, axis developer, transfer roller.
LSU

Cause of error "Vertical line and band" on the printed pages:

– LSU unit has occur problem or simply dirty
– Damaged develop roller in the developer. Deformed Doctor-blade or cleaning blade.
– Scratched surface of the discharge roller in the developer.
– Partly depression or deformation on the surface of the transfer roller
How to meliorate error "Vertical Line & Band" on the printed pages for Samsung printer CLP-310/315 Printer:
– Clean the LSU unit by soft cotton cloth and try to print. If printed pages still faulty as initial you must regenerate new LSU unit or contact a service representative.
– If causes are cause 2nd and 3rd, you need renew new axis developer & try to print
– If causes are cause 4nd, you need renew transfer roller.

2. Dark Image or black on printed page for Samsung printer CLP-310/315 Printer

Description Dark Image or black: The printed pages is dark or full black.
Error location: HVPS unit
Cause of error "Dark Image or black" on the printed page:
– No charge voltage in the HVPS board
– Charge voltage is not turned on due to the bad contact between power supply in the side of the developer and charge terminal of HVPS
Repair error "Dark Image or black" on the printed pages for Samsung printer CLP-310/315 Printer:
– Clean the high voltage charge terminal
– Check the state of the connector which connects the engine board and HVPS.
– Replace the HVPS if not solved by the atop direction 1 & 2

3. Light image on printed page for Samsung printer CLP-310/315 Printer

Description: The printed page is light and no ghost
Error location: Developer, HVPS
DeveloperCause of error "Light image" on the printed pages
– Develop roller is stained when the toner of developer cartridges is almost consumed
– Temperature in room is below than 10*C
– Bad contact caused by the toner dirty between the high voltage terminal in the HVPS and the one in the set
– Abnormalities output from the HVPS
Repair error "Light image" on the printed page for Samsung printer CLP-310/315 Printer:
– Renew the new developer & try to print out
– After printer is power on, please wait 30 minutes then start printing
– Clean up the dirty area by the toner
– Regenerate the new HVPS if the problems are not solved by the on top of four directions
You can find solutions meliorate other errors of Samsung printer CLP-310/315printer in "Samsung CLP-310/315 Service Repair Manual". The coming is table of message error of Samsung printer CLP-310/315
Samsung printer CLP-310/315Service Repair Manual document very important with technician when repair the Samsung printer CLP-310/315printer. "Samsung CLP-310/315Service Repair Manual" guide technician remove & installed components internal Samsung CLP-310/315printer, providing them knowledge intensive the component, how to take apart and meliorate bugs in the process of using Samsung printer CLP-310/315printer that the user themselves can not repair.

The LED status shown in four states: Red light turned on and off repeatedly, Red light, light off, Green light. one by one Led status is a printer’s error status. For example: Toner low, toner empty, paper jam, …

Currently, Color laser printers CLP-300 is being used quite extensively. Samsung printer CLP-300 printer also has advantages ensuing: print speed, toner saving and easy to put to work.
However, we can not avoid the damage of your printer as some components of your printer caused in during use.
When the printer experiences an error, the control panel will indicate an error message with the indicator lights and the Smart Panel program window will shows to show the printer’s status or errors. Find the light pattern below that matches your printer light pattern & follow the solutions to clear the error.
–

The CLP-300 Printer ink led red light blinking and status led green light

: Toner cartridge is low. You need order new toner cartridge or preparation toner powder and toner chip then replace toner cartridges or toner refill your printer cartridge samsung printer CLP-300. You can temporarily improve print quality by shake the toner cartridge.
– The ink led red light & status red light blinking: Toner printer cartridge is empty. You need change new toner cartridges or toner refill cartridges, now.
– The ink led red light & status red light: Toner cartridges is totally exhausted. You need regenerate new toner cartridge or toner refill cartridges, now.
– The ink led light off & status red light:
+ A paper jam has occurred. To solve the problem.
+ The front cover is open. Close the front cover.
+ There is no paper in the tray. Load paper in the tray.
+ The waste toner container is open or full. Test the container.
+ Your system has some problems. If this problem occurs, contact your service representative
You can find solutions repair other errors of Samsung printer CLP-300 printer in "Samsung printer CLP-300 Service Repair Manual". The following is table LED status legend for Samsung printer CLP-300
Samsung CLP-300 Service Repair Manual document very important with technician when fix the Samsung printer CLP-300 printer. "Samsung CLP-300 Service Repair Manual" guide technician remove & setup components internal Samsung CLP-300 printer, providing them knowledge intensive the component, how to take apart & mend bugs in the process of used Samsung printer CLP-300 printer that the user themselves can not repair.

Samsung CLP-360/365 has orrcur problems when print: Vertical Black Line & Band, Vertical White Line, Contamination on back of page, Dark or Black image, Horizontal Band, Uneven Density, Poor Fusing, Blank Page.

Currently, Color laser printers Samsung printer CLP-360/365 is being using quite extensively. Samsung CLP-360/365 printers also has advantages ensue: Enjoy quality printouts, Polymerised toner, Ergonomic design, Easy to put to work, Easy Colour Manager, Easy Solution support.
However, we can not avoid the damage of your printer as some components of your printer caused in during proceed.
The coming, I will introduce three standard errors of Samsung CLP-360/365 printer. With other print page errors, you accurrence at "Samsung CLP-360/365 Service Repair Manual"

1. Vertical Black Line and Band (Description : Straight thin black vertical line occurs in the printed image)

Cause of errors:
– Test if the surface of the charge roller is scratched or contaminated.
– Test if there are grooves on the circumference of the OPC drum.
– Test if the cleaning blade is damaged.
– Test if paper transfer belt is damaged or contaminated.
The solution errors:
– Regenerate the imaging unit & check again.
– Change the ITB unit and check again.

2. Uneven Density (Description : Print Density is uneven between left & right)

Cause of errors:
– The life of the Toner Printer cartridge has expired.
– The pressure force in the left & right springs of the ITB unit is not even.
The quick errors:
– Replace the toner cartridge
– Change the ITB Unit

3. Vertical White Line (Description : White vertical voids in the image.)

Cause of errors:
– Test if the LSU window or internal lenses of LSU is contaminated.
– Test if there are scratches on the circumference of the OPC drum.
– Check if there are scratches on the circumference of the developing roller.
– Test if paper transfer belt is damaged or contaminated.

The solution errors:

– Clean the LSU window with recommended cleaner(IP A). Clean the window with a clean cotton swab. If dirt is inside the LSU, change the LSU.
– Regenerate the imaging unit and check again
– Change the ITB unit and test again.
You can find solutions repair other errors of Samsung printer CLP-360/365 printer in "Samsung CLP-360/365 Service Repair Manual". The coming is table of message error of Samsung printer CLP-360/365
Samsung printer CLP-360/365 Service Repair Manual document very important with technician when mend the Samsung printer CLP-360/365 printer. "Samsung CLP-360/365 Service Repair Manual" guide technician remove & setup components internal Samsung printer CLP-360/365 printer, providing them knowledge intensive the component, how to take apart & mend bugs in the process of using Samsung printer CLP-360/365 printer that the user themselves can not mend.

After long time using, If the Samsung printer ML-84/85/85G/1010H/1520P printer is not working properly, refer the ensuing errors message & follow the corresponding troubleshooting associated.

The common errors of Samsung printer ML-84/85/85G/1010H/1520P printer as follows:

– The printer does not print.
– Paper does not feed into your printer.
– A print job is extremely slow.
– The paper keeps jamming.
– Fuser error
– Scan error
– Cover open
– No ERROR lamp when the cover is open
This artical, I will introduction for you some Message error (Error code) of Samsung printer ML-84/85/85G/1010H/1520P printer & How to fix error Samsung printer CLX-3160N/3160FN?
For restore all problem of the printer, refer to the table of suggested solutions:

1. How to meliorate "The printer does not print" Samsung ML-84/85/85G/1010H/1520P printer

The ensuing is cause and quick "The printer does not print"
– The printer does not print because Toner error.
+ Toner empty – Renew new cart: When smart panel shown on this error, the printer will not print, LED status red light. Now, you need to renew genuine toner printer cartridge or Fee savings, you should toner refill for toner printer cartridge Samsung printer ML-84/85/85G/1010H/1520P printer. Then change new toner chip congruous with your printer or reset toner chip Samsung printer ML-84/85/85G/1010H/1520P or upgrade firmware fix (reset fix meliorate) for Samsung printer ML-84/85/85G/1010H/1520P

+ Toner cartridge not compatible (LED status red light): You replaced wrong toner cartridge or toner printer cartridge chip. You need try replace it correct
+ A toner cartridge is not Install: installed toner cartridge into printer. If still error then you need check the paper exit sensor. If you can not restore then change paper exit sensor
– The printer does not receiving power
+ Give sure power cable connected from printer to power source
+ Make sure you enabled power sources (press power button). If the printer still error go to next step
+ Test the SMPS board, & replace new SMPS board if can not restore
– The printer did not selected as the default printer
Start/ Devices & Printer (Printer and Fax)/ Right click “Samsung CLX-3170 series” & choose “Set as default printer”
– The printer cover is not closed (Door open).
+ Close the door (front, rear)
+ After door closed, If still error you should check the front cover sensor and rear cover sensor
– Paper is jammed.
+ Paper Jam 0 Open/Close Door
+ Paper Jam 1 Check Inside
+ Paper Jam 2
Refer to How to fix(restore) paper jam error Samsung printer ML-84/85/85G/1010H/1520P
– No paper is loaded: Load paper in the paper tray. If paper has been load to paper tray, you checking paper sensor (repair or regenerate paper feed sensor)
– Computer does not connected to printer: Check printer cable and reconnect. If disconnected you should renew the new printer cable or checking main PBA (card formater)
– The port setting is incorrect: Try select the correct port
– The printer driver may be incorrectly Install: Reinstall printer driver

2. How to restore "A print job is extremely slow" Samsung ML-84/85/85G/1010H/1520P printer.

The ensue is cause & quick "A print job is extremely slow"
The job may be very complex.
– Down the complexity of the document or replace the print quality settings.
– Plug in to other pc

3. How to repair "Paper does not feed into the printer" Samsung ML-84/85/85G/1010H/1520P printer.

The coming is cause & quick "Paper does not feed into the printer"
Paper has been loaded incorrectly.
– take away paper from the tray & reload it correctly.
– Choose paper size correctly (printer preferences)
Paper in paper tray is too much
– Truncated paper out of paper tray
Paper is too thick, too thin, winkled
– Use only paper that meets the specifications required by the printer.
After you has implemented of the steps on top of if printer still error, go to next step
– Clean paper feed sensor in paper tray 1, paper tray 2, MPT tray.
– If still error you should change paper feed sensor.

4. How to mend "The paper keeps jamming" Samsung printer ML-84/85/85G/1010H/1520P printer.

The following is cause & quick "The paper keeps jamming"
Paper in paper tray is too much
– Take out excess paper out of paper tray
May be debris inside the printer. Ex: staples, paper clips, candybark, scraps of paper ..
– Find & remove them
Feed sensor, paper exit sensor error
– Clean paper feed sensor, paper exit sensor
– If still error you should change paper feed sensor, paper exit sensor

5. How to fix “Fuser error” Samsung ML-84/85/85G/1010H/1520P printer

A message below is shown on smart panel of printer: Fuser error & all LEDs light turned on and off repeatedly. Now, your printer does not print
The ensue is cause and quick "Fuser error".
– Thermostat, power cable plug in from fuser unit or heat lamp is open circuit.
+ Regenerate heat lamp or power cable.
+ Regenerate the fuser unit if the thermostat is open circuit.
– Thermistor is faulty
Be carefull checking the thermistor reassembly
+ If the reassembly incorrect or the roller in fuser unit is melted then you must change the fuser unit.
+ If the thermistor is faulty but there is no sign of heat damage then you just regenerate the thermistor sensor.
– Drive gear melted: Renew fuser unit

6. How to restore “Scan error” Samsung ML-84/85/85G/1010H/1520P printer

A message below is shown on smart panel of printer: scan error & all LEDs light turned on & off repeatedly. Now, the printer does not print
The coming is cause and quick “Scan error”
– LSU motor does not put to work: Change the LSU or cable connector from LSU motor.
– LSU cable or connector faulty: Renew the LSU or cable connector from LSU unit.
– Test the HSYNC signal:
+ If there is a HSYNC signal, change main board.

More details, you shows in "Samsung printer ML-84/85/85G/1010H/1520P Service Repair Manual".
Samsung printer ML-84/85/85G/1010H/1520P Service Repair Manual document very important with technician when restore, disassemble (removable) components the Samsung ML-84/85/85G/1010H/1520P printer. "Samsung printer ML-84/85/85G/1010H/1520P Service Repair Manual" guide technician remove & setup components internal Samsung printer ML-84/85/85G/1010H/1520P printer, providing them knowledge intensive the component, how to take apart & fix bugs in the process of using Samsung printer ML-84/85/85G/1010H/1520P printer that the user themselves can not mend.
You can Cost it at the ensue:

Price for Samsung printer ML-84/85/85G/1010H/1520P Service Repair Manual: $ 5
To get Service Repair Manual, pls payment with ensue info :
Paypal : helinacare@gmail.com